Daily Use - IKEA RENGORA Manual

Hide thumbs Also See for RENGORA:
Table of Contents

Advertisement

ENGLISH
• The indicator
setting:
signal is on.
3. Press
to change the setting.

Daily use

1. Open the water tap.
2. Press the on/off button to activate the
appliance.
Make sure that the appliance is in
programme selection mode.
• If the rinse aid indicator is on, fill the
rinse aid dispenser.
3. Load the baskets.
4. Add the detergent. Refer to "Using the
detergent".
5. Set and start the correct programme for
the type of load and the degree of soil.
Using the detergent
1
3
A
Put the detergent or
the multi-tablet in
compartment (A).
shows the current
is on = the acoustic
2
4
is off = the acoustic signal is off.
4. Press the on/off button to confirm the
setting.
The appliance is now off.
When you use multi-tablets that contain
rinse aid, it is not necessary to fill the rinse
aid dispenser.
• Set the rinse aid dispenser to the lowest
position.
If the programme has a prewash phase, put
a small quantity of detergent on the inner
part of the appliance door.
What to do if you want use detergent
which doesn't contain rinse aid
Before you start to use detergent and rinse
aid separately do the following procedure.
1. Make sure that the rinse aid container is
full.
2. Start the shortest programme with a
rinsing phase. Do not add detergent
and do not load the baskets.
3. When the programme is completed,
adjust the released quantity of rinse aid.
Setting and starting a programme
The Auto off function
This function decreases energy consumption
by automatically deactivating the
appliance when it is not operating.
12

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents