Troubleshooting - Bissell SPOTCLEAN PROFESSIONAL 3624 Series User Manual

Operati s
Empty dirty tank
1. When the dirty tank reaches the "FULL" line
on the tank it is time to empty.
2. Remove dirty tank and carry to a utility
sink, toilet or outside (where you will
dispose of the dirty water).
3. To unlock the dirty tank lid, rotate handle over
the back of the tank. Remove lid and pour out
dirty water. Rinse out dirty tank to remove any
debris.
4. Replace top of tank, and rotate the handle
forward to lock in place on front of tank.
5. Before replacing tank on machine, wipe
debris from red filter
Cleaning machine
1. Remove and rinse the tools in clean,
running water. Dry and replace in the tool
storage provided.
2. It is recommended that you suction clean
water from a bowl to rinse out the hose.
Then lift end of hose and stretch out to
ensure all water is cleared from hose.
3. Coil flex hose around the hose wrap and
secure with latch.
4. Check suction gate and if it appears dirty,
follow steps 1-4 under Cleaning Suction
Gate on page 8.
2.
4.
WARNING
To reduce the risk of fi re, electric shock, or injury,
turn power OFF and disconnect plug from
electrical outlet before performing maintenance or

troubleshooting.

www.BISSELL.ca
3.
5.
Tip
For best results empty, rinse and
dry both tanks before storing.
1-800-263-2535
7