Bissell SPOTCLEAN PROFESSIONAL 3624 Series User Manual page 18

Tr blesh ting
Problem Possible causes
Formula & water tank may be
empty
Reduced
Formula & water tank may not be
spray OR
seated completely
no spray
Pump may have lost prime
Tanks may not be seated properly
Dirty tank has picked up maxi-
mum amount of dirty water and
has reached full line
Loss of
suction power
Formula & water tank is empty
Suction Gate is open.
Please do
not return
this product
to the store.
Other maintenance or service not included in the manual should
be performed by an authorized service representative.
Thank you for selecting a BISSELL product.
For any questions or concerns, BISSELL is happy to
be of service. Contact us directly at 1-800-263-2535.
WARNING
To reduce the risk of electric shock, turn power switch
o and disconnect plug from electrical outlet before
performing maintenance or troubleshooting checks.
Remedies
Refill tank
Turn power OFF. Remove and reseat
tank
Hold end of hose below water level in
tank to prime
Pick up both tanks and reseat them
so it they fit snugly on the unit
Empty dirty tank
Check fluid levels in formula & water
tank
Check to make sure the suction gate
is closed. Follow "Cleaning Suction
Gate" instructions on page 8.
www.BISSELL.ca 1-800-263-2535
9