Bissell SPOTCLEAN PROFESSIONAL 3624 Series User Manual page 11

Operati s
Cleaning with Tools
Important! If using to clean upholstery, check
upholstery tags. Check manufacturer's tag
before cleaning. "W" or "WS" on the tag
means you can use your Spot Clean Pro if
the tag is coded with an "X" or an "S"(with
a diagonal stripe through it), or says "Dry
Clean Only", do not proceed with any deep
cleaning machine. Do not use on velvet or silk.
If manufacturer's tag is missing or not coded,
check with your furniture dealer.")
1. Hold the tool approximately 1" above the
soiled surface. Press the spray trigger to
apply the cleaning solution to the soiled
area.
Note: Hold end of hose below the tank
water level to help prime the portable
spot cleaner.
2. Using the brush on the tool, gently scrub
the area to be cleaned.
3. Apply downward pressure on the tool and pull
it toward you. The suction will remove the dirt
and cleaning solution. Continue until no more
dirt can be removed.
Cleaning with Deep Reach
1. Set tool on soiled surfaces and press the trigger
to spray solution onto the soiled area to be
cleaned.
2. Slowly move the tool back and forth over the
soiled surface, keeping the tool in contact with
the carpet.
Release trigger and move tool slowly over
the soiled area to suction up water and
dirt.
4. Continue to clean the area, working in
small sections, until no more dirt can be
removed.
www.BISSELL.ca
6
Tools (Select Models)
TM
1-800-263-2535
Manufacturer's tag
Check for colorfastness in an
inconspicuous place. If possible,
check upholstery stu ng.
Colored stu ng may bleed
through fabric
1.
3.