Bissell SPOTCLEAN PROFESSIONAL 3624 Series User Manual page 10

Operati s
Before you clean
1. Vacuum area with a dry vacuum cleaner
thoroughly before deep cleaning.
2. Pretreating (optional):
2a. Pretreating is recommended to improve
cleaning effectiveness for heavily soiled
carpet in high traffic areas such as entryway
and hallways.
2b. BISSELL Tough Stain Pretreat
Spray the BISSELL Tough Stain Pretreat
formula onto heavy traffic areas, soiled
areas or stains.
Allow to penetrate for at least 3 minutes.
Clean as normal, following the instructions
below.
Preparing the machine
1. Release flex hose by twisting the hose
secure latch clockwise. Unwrap flex hose
completely.
2. Attach the desired tool to the hose grip until
it snaps together. Make certain the tool is
securely attached.
3. Twist the Quick Release™ cord wrap
clockwise to unwrap the power cord
completely and plug into grounded outlet.
Filling formula & water tank
1. Remove tank from the back of the machine
by lifting up tank carry handle.
NOTE: This tank was designed with
a flat bottom so it can be easily
filled.
2. Unscrew the black cap and remove bottle
insert.
3. Fill tank with hot tap water to the water
fill line. Add two ounces of BISSELL 2X
formula to the tank.
4. Replace the bottle insert in the tank and
tighten the black cap. Replace the tank on
the portable machine.
Some Berber carpets have a tendency to
fuzz with wear. Repeated strokes in the
same area with an ordinary vacuum or deep
cleaner may aggravate this condition.
1.
www.BISSELL.ca
WARNING
2b.
2.
Tip
» Make only one trip to the sink
by bringing the entire portable
cleaner. Fill and empty in the
same trip.
1-800-263-2535
5