Searching for a photo
– Photo search/Photo scan
You can search for the still image recorded on tape (photo search).
You can also search for still images one after another and display each image for 5
seconds automatically (photo scan). Use the Remote Commander for these operations.
Searching for a photo
(1) Set the POWER switch to VCR.
(2) Press SEARCH MODE on the Remote Commander repeatedly, until the photo
search indicator appears.
The indicator changes as follows:
DATE SEARCH t PHOTO SEARCH
no indicator T PHOTO SCAN
(3) Press . or > to select the photo for playback. Each time you press . or
>, the camcorder searches for the previous or next photo. Your camcorder
automatically starts playback from the photo.
2
SEARCH
MODE
3
To stop searching
Press x.
PHOTO
00
SEARCH
PHOTO
01
SEARCH
61