Using The I.link Cable (Dv Connecting Cable) - Sony DCR-TRV130 Operating Instructions Manual

Dubbing a tape

Using the i.LINK cable (DV connecting cable)

Simply connect the i.LINK cable (DV connecting cable) (optional) to
DV IN/OUT and to DV IN/OUT of the DV products. With digital-to-digital
connection, video and audio signals are transmitted in digital form for high-quality
editing. You cannot dub the screen indicators.
(1) Insert a blank tape (or a tape you want to record over) into the VCR, and insert
(2) Set the input selector on the VCR to DV IN if it is available. Refer to the
(3) Set the POWER switch to VCR.
(4) Play back the recorded tape on your camcorder.
(5) Start recording on the VCR.
: Signal flow
When you have finished dubbing a tape
Press x on both your camcorder and the VCR.
You can connect one VCR only using the i.LINK cable (DV connecting cable).
See page 94 for more information about i.LINK.
The following functions do not work during digital editing :
– Picture effect
– Digital effect
– Tape PB ZOOM
If you record a playback pause picture via the DV IN/OUT jack
The recorded picture becomes rough. Also, when you play back the recorded pictures
on other video equipment, the picture may jitter.
64
the recorded tape into your camcorder.
operating instructions of your VCR for more information.
Refer to the operating instructions of your VCR for more information.
DV IN/OUT
(optional)
DV S VIDEO
DV IN/OUT