Target Group For This Manual; Intended Use; Technical Description - Waeco DC-Kit3 Installation And Operating Manual

DC-Kit3.book Seite 26 Freitag, 13. Juni 2008 3:24 15

Target group for this manual

4 Target group for this manual
The installation information in this manual is only intended for qualified per-
sonnel at workshops, who are familiar with the guidelines and safety precau-
tions to be applied during the installation of vehicle accessory parts.
All other chapters are intended for the users.
5

Intended use

The DC-Kit3 extension kit (item no. 9100300002) is suitable for equipping the
following Dometic roof air conditioners for 12 V driving:
CA1000, CA2500
B1600, B2200, HB2500
The MSK1500-012 inverter is only designed for the cooling device in the roof
air conditioner not for the heating mode, as the heating elements take more
power than the inverter is able to generate in continuous operation.
The VS-230-2 priority circuit can also have a 230 V consumer unit connected
to it for operation. The power supply for the additional consumer unit in invert-
er mode is only available if the roof air conditioner is not switched on.
I
Note
The functions described in this manual for the B2200 Dometic roof
air conditioner apply to roof air conditioners with a serial number
higher than 802200001.
For B2200 Dometic roof air conditioners with a lower serial
number, the information for the B1600 Dometic roof air conditioner
applies.
6

Technical description

The DC-Kit3 extension kit enables Dometic roof air conditioners to be used
in vehicles with 12 V . The extension kit consists of the following compo-
nents:
The ECL-102 charging current distributor with low voltage protection reg-
ulates the power distribution between the starter battery, supply battery
and lightmachine. This prevents the battery and the electronics in the ve-
hicle from overloading.
26
DC-Kit3