Sony DCR-SR40 Handycam Operating Manual page 28

Digital video camera recorder
Hide thumbs Also See for DCR-SR40 Handycam:
Table of Contents

Advertisement

Pressing START/STOP or PHOTO does not record movies/still images.
• Slide the POWER switch to light up the
• Your camcorder is recording the image you have just shot on the hard disk of the camcorder.
You cannot press PHOTO while [CAPTURE] or
• The hard disk of the camcorder is full. Delete unnecessary images. Or perform [HDD
FORMAT].
• The temperature of your camcorder is extremely high. Turn off your camcorder and leave it
for a while in a cool place.
• The temperature of your camcorder is extremely low. With POWER switch turned on, leave
the camcorder for a while. If you still cannot operate the camcorder, turn it off, taking it to a
warm place. Leave the camcorder there for a while, then turn on the camcorder.
The recording stops.
• The temperature of your camcorder is extremely high. Turn off your camcorder and leave it
for a while in a cool place.
• The temperature of your camcorder is extremely low. Turn off the camcorder and take it to a
warm place. Leave the camcorder there for a while, then turn on the camcorder.
• The maximum continuous recordable time is approximately approximately 13 hours.
Setup items are grayed out.
• You cannot select grayed out items in the current situation.
The beep sounds for five seconds.
• The temperature of your camcorder is extremely high. Turn off your camcorder and leave it
for a while in a cool place.
• Some problems have occurred in your camcorder. Turn off and on, then operate your camcorder
again.
28
(Movie) or the
(Still) lamp (p.12).
appears on the LCD screen.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents