Crown C48-2+2 Owner's Manual And Service Manual page 66

PARTS AND ASSEMBLY PROCEDURE
4. Assemble the sun top as per following methods.
Put the sun top on the front and rear
supporting strut (Fig.8)
Lock the bolt with wrench ( Fig.10)
5. Assemble windshield as per following instructions.
Insert the windshield into
sash .(Fig 12)
Owner's Manual and Service Guide
Inset the screw and rubber cushion
into the front strut (Fig9)
After whole assembling (Fig.11)
Insert the limiting location bar into
the front supporting strut (Fig 13)
63