Assembly Procedure - Crown C48-2+2 Owner's Manual And Service Manual

PARTS AND ASSEMBLY PROCEDURE

ASSEMBLY PROCEDURE

1. Take out the cart and the spare parts.
2. Assemble the front strut as per following method.
Insert the bolt into the
front strut. (Fig 1)
3. Assemble the back strut as per following method.
Put the back strut into
the hole (Fig 4)
Insert the bolt and rubber
cushion into the cover (Fig 2)
Insert the bolt and nut (Fig 5)
Owner's Manual and Service Guide
Lock the bolts with
wrench. (Fig 3)
Lock the bolt with wrench
(Fig 6)
62