Operation And Service Information; Before Initial Use - Crown C48-2+2 Owner's Manual And Service Manual

OPERATION AND SERVICE INFORMATION

OPERATION AND SERVICE INFORMATION
Read all of manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notes,
Cautions and Warnings
Thank you for purchasing this vehicle. Before driving the vehicle, we ask you to spend some time reading
this Owner's Manual and Service Guide. This guide contains the information that will assist you in
maintaining this highly reliable vehicle.
This vehicle has been designed and manufactured as a "World Vehicle". Some countries have individual
requirements to comply with their specifications: therefore, some sections may not apply in your country.
Most of the service procedures in this guide can be accomplished using common automotive hand tools.
Read, understand and follow the safety label on the instrument panel. Be sure you understand how to operate
the vehicle, its equipment and how to use it safely. Maintaining good performance depends to a large extent
on the operator.
Before a new vehicle is put into operation, the items shown in the INITIAL SERVICE CHART must be
performed (Ref Fig.1).
Vehicle batteries must be fully charged before initial use. Check for correct tire inflation. See GENERAL
SPECIFICARIONS.
Determine and record braking distance required to stop vehicle for future brake performance tests.
Remove the protective clear plastic, that protect the seat bottom and back rest during shipping, before placing
the vehicle in service.
ITEM
Batteries
Seats
Brakes
Tires
Portable Charger
Fig.1 Initial Service Chart

BEFORE INITIAL USE

SERVICE OPERATION
Charge batteries
Remove protective plastic covering
Check operation and adjust if necessary
Establish acceptable stopping distance
Check air pressure (see SPECIFICATIONS)
Remove from vehicle and properly mount
Owner's Manual and Service Guide
8