Tire Inspection; Brake - Crown C48-2+2 Owner's Manual And Service Manual

OPERATION AND SERVICE INFORMATION
STEERING ASSEMBLY .
TIE ROD/LINKAGES .
REAR AXLE .
QUARTERLY
- 50 HOURS
FRONT AXLE .
FRONT SHOCK ABSORBERS . Check for oil leakage and loose fasteners
FRONT SPRINGS .
FRONT WHEEL ALIGNMENT .Check for unusual tire wear, align if required
PARK BRAKE
. Check for bent/binding linkage rod
. Check for damage or wear to latch arm or catch bracket
. Lubricate as required, use light oil. DO NOT LUBRICATE CABLES OR BRAKE LATCH
REAR SHOCK ABSORBERS . Check for oil leakage, loose mounting hardware
CHARGER PLUG . Clean auxiliary contact (see BATTERY CHARGER MAINTENANCE)
HARDWARE AND FASTENERS
. Check for loose or missing hardware and components
. Tighten or replace missing hardware
SEMI-ANNUAL
- 125 HOURS
DIRECTION SELECTOR .
required)
KING PINS .
STEERING ASSEMBLY .
RACK END BALL JOINT .
REAR AXLE .
ANNUAL
- 250-300 HOURS
FRONT WHEEL BEARINGS . Check and adjust as required, see Technician's Repair and Service Manual
REAR AXLE .
SERVICE BRAKES
. Clean and adjust
. Check brake shoe linings

TIRE INSPECTION

Tire condition should be inspected per the Periodic Service Schedule. Inflation pressures should be checked
when the tires are cool. Be sure to install the valve dust cap after checking or inflating.
BRAKES
! WARNING !
To reduce the possibility of severe injury or death, always evaluate pedal travel before
operating a vehicle to verify some braking function is present.
All driving brake tests must be done in a safe location with regard for the safety of all personnel.
Check for abnormal play, tightness of all hardware
Check for excessive play, bent components or loose connections
Check for leakage, add lubricant level as required
Check for damage to axle and loose or missing hardware
Check for loose hardware, cracks at attachments
Check for wear and smooth movement (lubricate shaft with light oil if
Check for excessive play and tightness of retaining nuts
Check bellows and pinion seal for damage or grease leakage
Lubricate, use wheel bearing grease
Check for unusual noise and loose or missing mounting hardware
Check lubricant, add lubricant level as required
Owner's Manual and Service Guide
21