Searching for the end
of the picture
You can go to the end of the recorded portion
after you record and play back the tape. The tape
starts rewinding or fast-forwarding and the last
about 5 seconds of the recorded portion plays
back. Then the tape stops at the end of the
recorded picture (End Search).
While pressing OPEN, open the LCD panel and
press END SEARCH during recording standby.
This function works when the POWER switch is
set to CAMERA, VTR or PHOTO.
Notes on End Search
•When you use a tape without cassette memory,
the End Search function does not work once
you eject the cassette after recording.
•If there is a blank portion in the recorded
portion, the End Search may not function
correctly.
END SEARCH
29