Sony Handycam DCR-IP1 Operation Manual page 9

3
Start recording while checking the subject.
The date and time is not set up in the default setting. To set the date and time, see page 17.
a
Open the LCD panel.
b
While pressing the
green button, slide
the POWER switch
down to light up the
CAMERA-TAPE lamp.
The power turns on and the
lens cover opens.
c
Press START/STOP.
Recording starts. To
change to standby mode,
press START/STOP again.
4
View the recorded picture.
a
Slide the POWER switch
repeatedly until the PLAY/
EDIT lamp lights up.
The lens cover closes.
b
Touch
c
Touch
playback.
To stop, press
To turn off the power, slide the POWER
switch up to (CHG)OFF.
1
(rewind).
(play) to start the
.
2
1
3
2
3
9
Quick Start Guide