Convexs/Invexs Connections; Convexs Connections; Invexs 170 Connections; Invexs 190 Connections - Nedap Convexs Series Installation Manual And User's Manual

4.

Convexs/Invexs connections

The Convexs/Invexs is not hot-swappable, so when making or changing connections be sure power is Off.
General:
- Check corresponding documentation of used AEpacks, Convexs converters and third party systems.
- Use correct shielded cables, cable shield must be connected to Power GND of Convexs (A2) Invexs (2)
and GND of external device (or metal case)
- Beeper can also optional be controlled by configuration settings (see chapter 5).
- Check for Invexs 190 cabling colours
4.1.

Convexs Connections

Convexs
A1 Power /
XSMOD
A2 POWER GND/shield
A3 A (-)
A4 B (+)
A5 D0
A6 D1
A7 BEEP
A8 UL*
A9 GND
A10 NA*
4.2.

Invexs 170 Connections

Invexs
1 Power /
XSMOD
2 POWER GND/Shield
3 A (-)
4 B (+)
5 D0
6 D1
7 BEEP
8 UL*
9 GND
10 NA*
4.3.

Invexs 190 Connections

Wire Colour
w1 Red
w2 Black
w3 Grey
w4 Violet
w5 Green
w6 White
w7 Yellow
w8 Pink
w9 Blue
w10 Brown
w11 Shield / Metal
Remark:
UL*,NA*, MD* and BEEP are Open Collector to GND.
•
If Convexs adapters (AX1014 or AB350) are used, the original UL and NA signals
of the reader are converted to be used with UL* and NA* of the Convexs/Invexs.
Invexs 190 to AX1014 or AB350 needs additional connection between GND (for UL and NA) and
•
Antenna GND on the AX1014 / AB350 (Invexs 190 has no separate cable for this connection)
© Nedap N.V.
Function
Power in (10-30VDC) /
XS modulator (120kHz)
Power Ground
RS485
RS485
Wiegand Data 0
Wiegand Data 1
Beep input
UL led input
Led/Beep Common Ground
NA led input
Function
Power in (10-30VDC) /
XS modulator (120kHz)
Power Ground
RS485
RS485
Wiegand Data 0
Wiegand Data 1
Beep input
UL led input
Led/Beep Common Ground
NA led input
Function
Power in (10-30VDC) /
XS modulator (120kHz)
Power Ground / RF Ground
RS485 A (-)
RS485 B (+)
Wiegand Data 0 (D0)
Wiegand Data 1 (D1)
Beep input (BEEP)
UL led input (UL*)
MD led input (MD*)
NA led input (NA*)
EM shield (connected to power ground)
Nedap Readers Installation Guide
Convexs
Rear view
Invexs without display
1 10
Invexs with display
5 6
1
1 1
Cable shield (wire 11) must be
connected to the metal case of
the external device
UL*/NA* / BEEP
GND
Page 13 of 21
10
R