Time Settings - D-Link DIR-605 Manual

Section 3 - Configuration
The Time Configuration option allows you to configure, update, and maintain the correct time on the internal system
clock. From this section you can set the time zone that you are in and set the Time Server. Daylight Saving can also
be configured to automatically adjust the time when needed.
Select the Time Zone from the drop-down
Time Zone:
menu.
To select Daylight Saving time manually, select
Daylight Saving:
enabled or disabled, and enter a start date and
an end date for daylight saving time.
Press this button to set the device's time the same
Sync your
to local PC.
Computer's Time
Settings:
NTP is short for Network Time Protocol. NTP
Enable NTP
synchronizes computer clock times in a network
Server:
of computers. Check this box to use a NTP server.
This will only connect to a server on the Internet,
not a local server.
Enter the NTP server or select one from the drop-
NTP Server Used:
down menu, then the DIR-605 will sync the same
time to D-Link Internet time server.
To manually input the time, enter the values in
Manual:
and Second and then click Set Time.
D-Link DIR-605 User Manual

Time Settings

55