Table of Contents
Advertisement
Section 3 - Configuration
The Time Configuration option allows you to configure, update, and maintain the correct time on the internal system clock. From this section you can
set the time zone that you are in and set the Time Server. Daylight Saving can also be configured to automatically adjust the time when needed.
Time Zone:
Select the Time Zone from the drop-down menu.
Daylight Saving:
To select Daylight Saving time manually, select enabled or
disabled, and enter a start date and an end date for daylight
saving time.
Enable NTP Server:
NTP is short for Network Time Protocol. NTP synchronizes
computer clock times in a network of computers. Check this
box to use a NTP server. This will only connect to a server on
the Internet, not a local server.
NTP Server Used:
Enter the NTP server or select one from the drop-down
menu.
Manual:
To manually input the time, enter the values in these fields
for the Year, Month, Day, Hour, Minute, and Second and then
click Set Time. You can also click Copy Your Computer's
Time Settings.
L7-N-R2000 User Manual
Time Settings
60
Advertisement
Table of Contents
