Network Filters - D-Link DIR-605 Manual

Section 3 - Configuration
Use MAC (Media Access Control) Filters to allow or deny LAN (Local Area Network) computers by their MAC addresses
clients that are currently connected to the Broadband Router.
Select Turn MAC Filtering Off, allow MAC
Configure MAC
Filtering: addresses listed below, or deny MAC addresses
listed below from the drop-down menu.
MAC Address: Enter the MAC address you would like to
filter.
To find the MAC address on a computer, please
refer to the Networking Basics section in this
manual.
Select a DHCP client from the drop-down menu
DHCP Client:
and click << to copy that MAC Address.
New Schedule: Select to set the new schedule.
D-Link DIR-605 User Manual

Network Filters

43