D-Link DIR-605 Manual page 57

Wireless n router

Hide thumbs Also See for DIR-605:

Table of Contents

Section 3 - Configuration

My IPv6 Connection:

Select PPPoE from the drop-down menu.

PPPoE:

Enter the PPPoE account settings supplied by your Internet provider (ISP).

Select Static if your ISP assigned you the IP address, subnet mask, gateway, and DNS server addresses. In most cases, select

Address Mode:

Dynamic.

Enter the IP address (Static PPPoE only).

IP Address:

Enter your PPPoE user name.

User Name:

Enter your PPPoE password and then retype the password in the next box.

Password:

Enter the ISP Service Name (optional).

Select either Always-on, On-Demand, or Manual.

Service Name:

Enter a maximum idle time during which the Internet connection is maintained during inactivity. To disable this feature,

Reconnection Mode:

enable Auto-reconnect.

Maximum Idle Time:

Select either Obtain DNS server address automatically or Use the following DNS Address.

Enter the primary and secondary DNS server addresses.

D-Link DIR-605 User Manual

Table of Contents