D-Link DIR-605 Manual page 32

Section 3 - Configuration
This option is typically used for DSL services.
Internet Connection: Save your settings after configuring your
Internet Connection method.
Access Point Mode:
Enable to turn your router into an access point.
Internet Connection
Choose your Internet Connection type.
Type:
Address Mode:
Select Static if your ISP assigned you the IP
address, subnet mask, gateway, and DNS server
addresses. In most cases, select Dynamic.
PPPoE IP Address:
Enter the IP address (Static PPPoE only).
PPPoE Subnet
Enter the Primary and Secondary DNS server
Mask:
Addresses (Static PPPoE only).
PPPoE Gateway:
Enter the Gateway IP Address provided by your
ISP.
PPPoE Server IP: Enter your PPPoE password and then retype the
password in the next box.
Username: Select either Always-on, On-Demand, or
Manual.
Password:
Enter your PPPoE password and then retype the
password in the next box.
D-Link DIR-605 User Manual
Russia PPPoE
28