Location - Miele KFN 29683 D obsw Operating And Installation Instructions

Location

This appliance should be installed in a
dry, well-ventilated room.
When deciding where to install your
refrigeration appliance please bear in
mind that it will use more energy if
installed near to a heater, a cooker or
other appliance that gives off heat.
Direct sunlight should also be avoided.
The higher the room temperature, the
longer the compressor runs and the
higher the energy consumption is.
When installing the appliance, please
note:
– The socket must be easily accessible
in an emergency, not concealed
behind the appliance.
– The plug and cable must not touch
the rear of the appliance as they
could be damaged by vibrations from
the appliance.
– Do not plug in other appliances
behind this appliance.

Risk of damage due to
condensation on external appliance
panels.
In environments with high humidity,
condensation can build up on
external appliance panels, which can
cause corrosion.
For prevention, it is advisable to
install the refrigeration appliance
where there is sufficient ventilation in
a dry and/or air conditioned room.
After installation, make sure that the
appliance door closes properly, that
the specified ventilation gaps are
adhered to, and that the refrigeration
appliance has been installed in
accordance with these installation
instructions.
Installation
87