Miele KFN 29683 D obsw Operating And Installation Instructions page 75

Message

lights up red in the

freezer section
temperature display and
an alarm also sounds.
Cause and remedy
The temperature alarm has been activated (see
"Temperature and door alarm"). The temperature in
the freezer section has risen higher or fallen lower
than the temperature set.
Possible reasons for this include:
– The appliance door has been opened too
frequently.
– A large quantity of fresh food has been placed in
the freezer without switching on the SuperFreeze
function.
– A prolonged power cut (mains outage) has
occurred.
– The refrigeration appliance has a fault.
 Touch 
in the display.

The alarm message is confirmed: 
the alarm stops.
The start screen appears in the display: the warmest
temperature recorded in the freezer section will flash
for about 1 minute in the display. Then the
temperature display will change to the current
temperature in the freezer section.
You can exit from the flashing temperature display
early:
 Touch the temperature display for the freezer
section.
The warmest temperature displayed will disappear.
The display will then revert to showing the current
temperature in the freezer.
 Rectify the cause of the alarm.
 Depending on the temperature displayed, you
should check whether food in the freezer has
started to thaw or has defrosted. If it has, it should
be used as soon as possible. Defrosted food may
only be re-frozen after it has been cooked.
Problem solving guide
goes out and

75