Resetting To The Factory Default Settings; Accessing Information; Replace Charcoal Filter  Reminder - Miele KFN 29683 D obsw Operating And Installation Instructions

Selecting further settings
Resetting to the factory default
settings 
All appliance settings are reset to the
factory default and the appliance is
switched off.
Accessing information 
Appliance data (model number and
serial number) is shown in the display.
Tip: This data is important when
reporting an appliance fault to Miele
Service.
Confirm with
OK
information screen.
– Displaying licence agreements
Licences used can be displayed via ©.
44
to leave the
Replace charcoal filter  reminder
The appliance is fitted with charcoal
filters (Active AirClean) in a holder.
If the charcoal filter indicator has been
activated, you will be reminded to
replace the filters after approx.
6 months (see "Cleaning and Care" -
"Replacing the charcoal filters").
The  symbol will then appear in the
start screen in the temperature display
and an audible tone will sound (if
switched on).
Touch the symbol to confirm the
message. This resets the counter and
the display changes back to the start
screen.