Remote Commander (Dcr-Hc19E/Hc21E/Hc22E); Searching Quickly For A Desired Scene (Zero Set Memory) - Sony Handycam DCR-HC17E Operating Manual

Remote Commander
(DCR-HC19E/HC21E/HC22E)
Remove the insulation sheet before using
the Remote Commander.
Insulation sheet
1
2
3
4
5
 PHOTO* (p. 20)
The image displayed on the screen when you
press this button will be recorded as a still
image.
 SEARCH M.*

*
 
 Video control buttons (Rewind,
Playback, Fast-forward, Pause, Stop,
Slow) (p. 19, 21)
 ZERO SET MEMORY*
 Transmitter
 REC START/STOP (p. 18, 20)
 Power zoom (p. 22)
 DISPLAY (p. 15)
Press this button to hide the screen indicators.
* These buttons are not available during Easy
Handycam operation.
• Point the Remote Commander towards the
28
remote sensor to operate your camcorder (p.
23).
• To change the battery, see page 83.
Searching quickly for a desired
scene (Zero set memory)
1
During playback, press ZERO
6
SET MEMORY
want to locate later on.
The tape counter is reset to "0:00:00"
7
and
8
If the tape counter is not displayed,
press DISPLAY
9
2
Press STOP
stop playback.
3
Press
The tape stops automatically when the
tape counter reaches "0:00:00."
4
Press PLAY
Playback starts from the point
designated "0:00:00" on the tape
counter.
• There may be a discrepancy of several seconds
between the time code and the tape counter.
• Zero set memory will not function correctly
if there is a blank section between recorded
sections on the tape.
To cancel the operation
Press ZERO SET MEMORY

at a point you
appears on the screen.
60min 0:00:00
FN
 .

when you want to

REW .


.
 again.