Connecting To A Vcr Or Tv - Sony Handycam DCR-HC17E Operating Manual

Connecting to a VCR or TV

Use any of the connection as shown in the following illustration. Connect your camcorder
to the wall socket using the supplied AC Adaptor for this operation (p. 9). Refer also to the
instruction manuals supplied with the devices to be connected.
A/V OUT jack
DV Interface
: Signal flow
* For DCR-HC21E/HC22E:
 A/V connecting cable (supplied)
 A/V connecting cable with S VIDEO
(optional)
When connecting to another device via the
S VIDEO jack, by using the A/V connecting
cable with an S VIDEO cable (optional),
pictures can be reproduced more faithfully
than with the supplied A/V cable connection.
Connect the white and red plugs (left/right
audio) and S VIDEO plug (S VIDEO
channel) of an A/V connecting cable
(optional). In this case, the yellow (standard
video) plug connection is not necessary.
S VIDEO connection only will not output
audio.
1
(Yellow) (White)
2
 i.LINK cable (optional)
(Red)
To i. LINK
i.LINK compliant
(IEEE1394) jack
device
3
Use an i.LINK cable to connect your
camcorder to another device. The video
and audio signals are transmitted digitally,
producing high quality pictures.
Note that you cannot output the picture and
sound separately.
• For DCR-HC17E/HC19E:
The DV Interface of your camcorder
is designed for output use only. Your
camcorder does not accept input data from
the connected device.
VCRs or TVs
Continued 
47