DC IN jack
With the mark facing
down
To the wall socket
For DCR-HC22E:
To remove your camcorder from the
Handycam Station
Turn off the power, then remove the
camcorder from the Handycam Station
holding both your camcorder and the
Handycam Station.
For DCR-HC17E/HC19E/HC21E:
To use an outside power source
You can operate your camcorder using the
power from the wall socket by making the
same connections as you do when charging
the battery pack. The battery pack will not
lose its charge in this case.
AC Adaptor
Charging time
Approximate time (min.) required when
you fully charge a fully discharged battery
pack.
Battery pack
NP-FP30 (supplied)
NP-FP50
NP-FP70
NP-FP90
Recording time
Approximate time (min.) available when
you use a fully charged battery pack.
Continuous
Battery pack
recording
time
NP-FP30
(supplied)
NP-FP50
NP-FP70
NP-FP90
• All times measured under the following
conditions:
Top: Recording with LCD screen.
Bottom: Recording with viewfinder LCD panel
closed.
* Typical recording time shows the time when
you repeat recording start/stop, turning the
power on/off and zooming.
Playing time
Approximate time (min.) available when
you use a fully charged battery pack.
LCD panel
Battery pack
opened
NP-FP30
(supplied)
NP-FP50
NP-FP70
Charging time
115
125
155
220
Typical
recording
time*
80
40
105
50
115
55
150
75
240
120
310
155
435
215
550
275
LCD panel
closed
95
120
135
170
280
350
Continued
11