Interleaved 2 Of 5 - PSC SP400 Manual

I
NTERLEAVED
The Interleaved 2 of 5 symbology has the following programmable features:
Check Digit — calculate the Check Digit to verify that the Check Digit
contained in the bar code label is correct. If you enable this feature,
your bar codes must contain a Check Digit.
You may also choose to transmit or not transmit the Check Digit
independent of whether the Check Digit is calculated by the scanner.
Transmit Check Digit will have no effect unless the Compute Check Digit
feature is enabled. If you choose Don't Compute Check Digit, the scanner
sends the Check Digit encoded in the bar code without verifying its
accuracy. If you choose both Compute Check Digit and Don't Transmit
Check Digit, the scanner will remove the Check Digit's contents before
sending the bar code data to the host.
Variable Length — If you select variable length, the scanner will recog-
nize labels with an even number of digits between 04 and 50 digits.
SET ----------------------------------------------
D
ON
C
OMPUTE
D
ON
T
RANSMIT
E
NABLE
D
ISABLE
END ----------------------------------------------
26
SP400/QuickScan 6000/6000 Plus RS-232 Interface Programming
2 5
OF
' --------------------
T COMPUTE
---------------------------
' -------------------
T TRANSMIT
---------------------------
-----------------------------
-----------------------------