PSC SP400 Manual page 19

S
ETTING
4. Scan the label representing the symbology whose label identifier you
wish to modify.
In our example, we would scan the 'UPC-A' symbology label.
5. Identify and scan the digits that correspond to the Hex Values.
The hex values from the ASCII chart that correspond to 'A1'
from our example are as follows:
31
order: 4, 1, 3, 1.
6. Scan the END label.
In our example, you have changed the default label identifier
prefix for UPC-A from 'A' to 'A1'.
SET ----------------------------------------------
D
ISABLE
T
RANSMIT
T
RANSMIT
R44-1541
S S
YMBOLOGY
= '1'. Thus, we would scan digit programming labels in this
hex
L I.D. C
ABEL ONTROL
L I.D.
ABEL AS
L I.D.
ABEL AS
L I
PECIFIC ABEL DENTIFIERS
C
ONTINUED
-------
P -----
REFIX
S -----
UFFIX
(L I.D.)
ABEL
41 = 'A', and
hex
15