Intercharacter Delay - PSC SP400 Manual

I
NTERCHARACTER
Intercharacter Delay refers to the pause, if any, between each character before it is
sent to the host. This time delay is used to control the flow of data from the
scanner, but it should not be required for most applications.
SET ----------------------------------------------
= N
= 10
= 20
= 30
= 40
= 50
= 60
= 70
= 80
= 90
= 100
END ----------------------------------------------
10
SP400/QuickScan 6000/6000 Plus RS-232 Interface Programming
D
ELAY
----------------------------
ONE
----------------
MILLISECONDS
----------------
MILLISECONDS
----------------
MILLISECONDS
----------------
MILLISECONDS
----------------
MILLISECONDS
----------------
MILLISECONDS
----------------
MILLISECONDS
----------------
MILLISECONDS
----------------
MILLISECONDS
MILLISECONDS
--------------