Universal Symbology Selection - PSC SP400 Manual

U S
NIVERSAL YMBOLOGY
To set the scanner to read all symbologies, scan the ENABLE ALL SYMBOLO-
GIES bar code below.
DO NOT scan SET or END bar codes when programming universal
symbology features. Programming mode is automatically entered
and exited when one of the two special bar codes below are scanned.
1 Code 128 is always active for the purpose of reading programming bar code labels,
however, the scanner does not transmit data to the host when in Programming Mode.
R44-1541
S
ELECTION
NOTE
E A S
NABLE LL YMBOLOGIES
D A S
ISABLE LL YMBOLOGIES
1
21