Siemens SIMOTION Function Manual page 34

Example of an application
6.1 General information on the application example
The following AS-Interface slaves are used on the AS-Interface addresses 3..5 in both example
projects:
Address
Address 3
Address 4
Address 5
Requirement
The addressing of the AS-Interface slaves and the configuring of the AS-Interface must be
completed.
Hardware platform
The application example is available for various SIMOTION hardware platforms. A sample
project with CP 343-2 P and DP/AS-Interface Link 20E/Link Advanced is provided for each
hardware platform.
Note
If the application example is not available for your hardware platform, you have to adapt the
hardware configuration.
Calling the application example
The application example can be found on the "SIMOTION Utilities & Applications" CD-ROM.
The "SIMOTION Utilities & Applications" CD-ROM is provided free of charge and is part of the
SIMOTION SCOUT scope of delivery.
1. Dearchive and open the project containing the application example.
2. Check the axis configuration.
3. If necessary, adapt the example project.
4. Save and compile the example project. Following this, you can download the sample project
to the SIMOTION device and switch to RUN mode.
Adapting the application example
The configuration in the example and its available hardware must be adapted to each other.
The following options are available:
● You can adapt the configuration in the example to the available hardware.
● Adapt the configuration of the hardware to the example.
You can adapt the configuration in the example to the available hardware.
AS-Interface master:
34
AS-Interface slave
AS-Interface slave with 2 digital inputs and outputs
AS-Interface slave with 2 analog outputs
AS-Interface slave with 2 analog inputs
Extension to the command interface for AS-Interface master modules
Function Manual, 01/2015