Siemens SIMATIC S7-1500 Automation System System Manual page 50
Hide thumbs
Also See for SIMATIC S7-1500 Automation System:
- System manual (523 pages) ,
- Function manual (402 pages) ,
- Manual (188 pages)
Table of Contents
Advertisement
Installation
5.5 Installing the CPU
Uninstalling the CPU
The CPU is wired, and is followed by additional modules.
1. Open the front cover.
2. Switch the CPU into STOP mode.
3. Turn off the fed supply voltage.
4. Pull off the connector for the supply voltage.
5. Loosen the bus connectors for PROFIBUS / PROFINET with the screwdriver, and remove
6. Undo the CPU's fixing screw(s).
7. Pivot the CPU out of the mounting rail.
50
them from the CPU.
S7-1500 Automation System
System Manual, 01/2013, A5E03461182-01
Advertisement
Table of Contents
