Siemens SIMATIC S7-1500 Automation System System Manual page 143

②
Regarding : Submenu names
The following table shows the available submenus of the display.
Table 12- 2
Main menu items Meaning
S7-1500 Automation System
System Manual, 01/2013, A5E03461182-01
Submenu names
Description
Overview The "Overview" menu contains information about the properties of
the CPU.
Diagnostics The "Diagnostics" menu contains information about diagnostic
messages, the diagnostic description, and the indication of
interrupts. Additionally there is information about the network
properties of each of the CPU's interfaces.
Settings In the "Settings" menu, IP addresses of the CPU are assigned, the
date, time of day, time zones, operating modes (RUN/STOP) and
protection levels are set, a memory reset and reset to factory
settings can be performed on the CPU, and the status of firmware
updates displayed.
Modules The "Modules" menu contains information about the modules that
are used in your configuration. The modules can be centrally or
peripherally deployed.
Peripherally deployed modules are connected to the CPU via
PROFINET and/or PROFIBUS.
You can set the IP addresses for a CP here.
Display In the "Display" menu, settings with respect to the display can be
configured, for example language setting, brightness and Energy-
saving mode (the Energy-saving darkens the display. The Standby
mode switches the display off).
Display of the CPU
143