Bluetooth Operation - iHome iHv330 Manual

FM OPERATION
1. Press the button to power on the unit.
2.Press the FM/BT button repeatedly to select the FM mode. The FM frequency indicator will
light up.
3.Press and hold either the
and play when a station is found.
NOTE: Press the
4. Press and hold the MEM/
or button to select the storage location(P01-P20).
5. Press the MEM/
6.Repeat steps 3 - 5 to search and store the desired stations. 20 stations can be stored in total.
Or press and hold the SET button to scan and store the available stations automatically.
7. Press the MEM/ PAIR button repeatedly to recall and select the desired stored station, The
LED display will show the frequency of the preset station selected. Then the unit will start
playback.
8. Press the ALARM 1/
NOTE: Fully extend and relocate the FM antenna to get better reception.
BLUETOOTH
1.) Press the button to power on the unit.
2.) Press the FM/BT button repeatedly to select the Bluetooth mode. The Bluetooth indicator
will light up and blink.
3.) Activate the Bluetooth function on your Bluetooth enabled device and try to search the
unit.
4.) When the pairing name "iHv330" appears on the pairing list, select it and make connection.
5.) After successful connection, the Bluetooth LED indicator will stop blinking.
6.) During playing:
Press the ALARM 1/
Press the MEM/
Press the
7.) Press and hold the MEM/
to pair with another Bluetooth Dvice.
NOTE: The unit will be automatically connected with the last paired Bluetooth Device if their
Bluetooth function are activated and they are in working range.
USB OUTCHARGING FUNCTION
Using the Oucharging Port on the rear of the unit to charge the proper device which adapts
to the power input DC 5V, 1A.
or
or button repeatedly to fine tune the received station.
PAIR button , "P04" will blink on display, then press the
PAIR button again to confirm the setting.
or ALARM 2/
OPERATION
or ALARM 2/
PAIR button to pause, press it again to resume normal playing.
or button to skip to previous or next track.
PAIR button to disconnect the current connection if you want
button to automatically search for a station, it will stop
button to adjust the volume.
button to adjust the volume.
6