Making Calls With Bluetooth Mobile Phone / Sleep Operation / Nap Operation - iHome iA100 Quick Start Manual

Making Calls with a Bluetooth Mobile Phone
Before you make a call with the iA100, you need to pair and link your Bluetooth-enabled phone with the iA100.
Please refer to Pairing procedure on page 7.
Answer a Call:
1. To answer a call, press the
2. Speak into the MIC (located above the
3. To end the call, press the
Dial/Re-dial Dialing:
1. Once the iA100 is paired to a Bluetooth mobile phone, you can use the keypad on your phone to dial a phone number,
then press the Button. Press the
3. To redial the last dialed number, press the
4. Press the or Button on the iA100 to adjust the call volume.
NOTE: The iA100 has separate volume settings for phone operation which don't affect the volume of other modes.
5. To end a call, press the
Sleep mode lets you sleep to iPad/iPhone/iPod, Bluetooth music or the radio, gradually lowering the volume until the unit
shuts off at the selected time.
1. Press the Bedtime Button to enter sleep mode. The Sleep Icon will appear on the display to indicate sleep mode.
Sleep mode has a Gentle Sleep feature which gradually lowers the volume.The unit will automatically turn off after the
selected sleep time.
2. You can adjust the sleep timer from 120, 90, 60, 30, 15 minutes or OFF by pressing the Bedtime Button again.
3. When the display changes back to show the real time, pressing the Bedtime Button once will show the sleep time
remaining. Pressing it again will change sleep time to next lowest increment.
4. iA100 has independent volume setting for sleep mode so you can adjust the sleeping volume without affecting the
alarm volume. Press the
The sleep volume will remain at that level the next time you enter sleep mode until controls are changed.
5. To stop listening at any time, press the
Nap mode lets you set an alarm separate from the Alarm 1 and Alarm 2 settings. The nap wake to source by default is the
tone alarm. TIP: You can adjust the nap wake to source with the iHome+Sleep app.
1. Press the Nap Button located on the back of the unit as needed to adjust the nap timer for 5, 10, 15, 20, 30, 45, 60, 90
or 120 minutes or OFF.
3. When the display changes back to show the real time, pressing the Nap Button once will show the nap time remaining.
Pressing it again will change nap time to the next highest setting.
Button. Now you can use the iA100 as a speaker phone.
Button) and press the
Button.
Button to cancel the call.
Button twice (x2).
Button.
Sleep Operation
Button on the iA100 or on the remote control to adjust the system sleep volume.
or
Button on the iA100 to turn it off.
Nap Operation
8
or Button on the iA100 to adjust the call volume.
P11