Using The Unit In Other Countries / Listening To Bluetooth Music - iHome HiP50 User Manual

Iphone alarm clock radio w/ bluetooth
Table of Contents

Advertisement

Different regions of the world use different FM radio frequency steps and ranges. You will need to select the one that
matches the standards in your region (USA, EUROPE, JAPAN, AUSTRALIA,or CHINA). The default setting is USA; if you
live in the US, you may skip this section.
1. Make sure the unit is OFF (not playing in any mode). Press and hold the Function Button for about 2 seconds until
"Radio xxx" appears in the lower part of display. Press and release the
2. Press and release the Function Button again (or no button within 10 seconds) to exit the radio frequency setting mode.
Two beeps will confirm radio frequency setting.
You need to pair your Bluetooth device with the unit before you can auto-link to play/stream Bluetooth music through the
unit. Pairing creates a permanent "bond" so two devices can always recognize each other.
Pairing:
1. Press and hold the Pairing Button to begin pairing operation. The Bluetooth and "pairing" icons will flash.
2. Activate Bluetooth on your device according to the device's user manual to link to the unit. You may need to input the
iHome device pass code: "1234".
3. Once connected, the Bluetooth Icon
4. The unit will auto link with the last linked device when that device is in range.
Playing Bluetooth Music:
1. Once your device and the HiP50 are linked you can start to play Bluetooth music through the HiP50.
2. Press and release the Function Button as needed until "Bluetooth" appears in the lower part of the display .
Button on the HiP50 to play your Bluetooth-enabled device. The display will show "Bluetooth". (Depending
3. Press the
on the Bluetooth device you are using, you may need to manually go into media player mode on your device to make it
work properly).
4. Press the
Button again to pause play; press again to resume it.
5. Press the
or
Button on the HiP50 to adjust the system volume.
Please remember to turn off Bluetooth device manually.
NOTE: The HiP50 must be in Bluetooth mode to play a Bluetooth-enabled device.
Using the Unit in Other Countries
Listening to Bluetooth Music
will remain.
7
or
Button to set the "xxx" to your region.
P10

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents