Removal Of Plasma Panel - Panasonic TH-37PR10U Service Manual

7.17. Removal of Plasma Panel

1. Remove 2 screws ( ) and then remove the Ferrite Core
from the Stand Block(L, R).
2. Remove 12 screws ( ) and then remove the Stand Block(L,
R).
3. Disconnect the connectors(DS1, DS4, DS6, DS7).
4. Remove 4 screws and then remove the Slot Block.
5. Disconnect the connectors(DS2, DS8, DS15).
6. Disconnect the connector(DN6).
7. Remove the Flexible Cable from the connector(DN1).
8. Remove 4 screws and then remove the DN-Board Block.
9. Disconnect the connectors(P2, P9, P11, P12, P25).
10. Remove 10 screws ( ) and then remove P-Board.
11. Remove 4 screws ( ) and then remove the AC-Inlet Block.
12. Disconnect the connector(D20).
13. Remove the Flexible Cables from the connectors(D31,
D32).
14. Remove 4 screws and then remove D-Board.
15. Remove 2 screws ( ) and then remove the Holder.
16. Remove SU-Board and SD-Board.
(Refer to Removal of SU-Board and SD-Board)
17. Remove 6 screws ( ) and then remove SC-Board.
18. Remove 2 screws ( ) and then remove the Plate.
25
TH-37PR10U / TH-42PR10U