Panasonic TH-37PR10U Service Manual page 26

TH-37PR10U / TH-42PR10U
19. Disconnect the connectors(SS23, SS34).
20. Remove the Flexible Cables from the connectors(SS53A,
SS54A, SS55A, SS56A).
21. Remove 6 screws ( ) and then remove SS-Board.
22. Remove 1 screw ( ) and then remove the Ferrite Core.
23. Remove the Flexible Cable from the connectors(C10, C20).
24. Remove 6 screws ( ).
25. Remove the 6 Spacers and Spacer Rings from the Plasma
Panel.
Caution:
· Please confirm the installation place of Spacer and
Spacer Ring when you exchange the Plasma Panel,
and install Spacer and Spacer Ring in an original
installation place after exchanging the Plasma
Panel.
26. Lift up the bottom of Plasma Panel to the arrow1 direction.
27. Pull the Plasma Panel to the arrow2 direction and then
remove the Plasma Panel.
26