Sony 500WSPL Operating Instructions Manual page 97

3
Access advanced menu page 13.
mP A G E 1 3 ( N E X Tm$ P R E Vm4)
F I L E S T O R E
F I L E : * H I S A T
D E S T I N A T I O N F I L E
U S E R 1
S T O R E F I L E
( Y E SmP U S H )
E X I T M E N U ( Y E SmP U S H )
a) An asterisk (*) appears in front of any factory preset
file whose contents have been revised at least once.
4
Move the cursor to DESTINATION FILE with the
MENU switch and turn the MENU dial to select
USER1, USER2, or USER3.
PAGE13(NEXTm$ PREVm4)
FILE STORE
FILE:*HISAT
mDESTINATION FILE
USER1
STORE FILE SURE?
(YESmPUSH)
EXIT MENU (YESmPUSH)
5
Move the cursor to STORE FILE? with the MENU
switch and press the MENU dial.
The display changes as shown below.
P A G E 1 3 ( N E X T m$ P R E V m4)
F I L E S T O R E
F I L E : * H I S A T
D E S T I N A T I O N F I L E
U S E R 1
mS T O R E F I L E S U R E ?
( Y E S mP U S H )
E X I T M E N U ( Y E S mP U S H )
6
Press the MENU dial to store the file. To abort the
save operation, press the MENU switch (the
display returns to the one shown at step 4).
When the save operation is finished, the display
changes as shown below.
PAGE13(NEXTm$ PREVm4)
FILE STORE
FILE:*HISAT
DESTINATION FILE
Currently
mSTORE FILE
selected file a)
EXIT MENU (YESmPUSH)
To save setup files to a tape
Load the tape onto which the file will be recorded.
1
Perform steps 1 to 4 of "Saving File Settings" and
select TAPE as the file saving destination.
PAGE13(NEXT m$ PREV m4)
FILE STORE
File in which
FILE:*HISAT
current
mDESTINATION FILE
settings are
STORE FILE
to be stored
EXIT MENU (YES mPUSH)
2
Move the cursor to STORE FILE? with the MENU
switch and press the MENU dial.
The display changes as shown below.
PAGE13(NEXT m$ PREV m4)
FILE STORE
FILE:*HISAT
DESTINATION FILE
mREADY TAPE
EXIT MENU (YES mPUSH)
USER1
DONE
TAPE
(YES mPUSH)
TAPE
(YES mPUSH)
Chapter 4 Viewfinder Screen Indications and Menus
(Continued)
97