Sony 500WSPL Operating Instructions Manual page 17

Sony digital camcorder operating instructions dsr-500wsl, 500wspl
Table of Contents

Advertisement

Indication
J Lithium backup battery warning
K DVCAM indication
L Cassette memory indication
M Audio mode indications
N Warning indications
O Service indication
P Battery capacity indication
Description
Appears when the voltage of the internal lithium backup battery (CR2032) is low. If this
indication appears, replace the lithium backup battery immediately.
For further information about replacing lithium battery, see "Inserting and Replacing
the Lithium Battery" (page 31).
Disappears when the cassette being played back is not for DVCAM format.
Appears when using a cassette with cassette memory.
These show audio recording/playback mode.
Fs32k: 4-channel mode (32kHz sampling frequency)
Fs48k: 2-channel mode (48kHz sampling frequency)
For further information about selecting audio recording mode, see "Menu 212
Selecting Audio Recording Mode" (page 109).
Include the following.
RF: Appears when the video heads are clogged, or when there is a fault in the
recording system.
SERVO: Appears when the servo lock is not functioning.
HUMID: Appears when there is condensation on the drum.
SLACK: Appears when there is a tape winding fault.
For measures against warning indications, see "Warning System" (page 127).
Appears during maintenance or VCR menu operations (page 103). It does not appear
during normal operation.
This indicates the battery capacity and voltage as shown below.
Change menu setting for the battery you are using.
For menu settings, see "Menu 206 Selecting Battery Capacity Indication" (page 106).
Indication
BATT E[xxxxxx]F
BATT E[xxxxxp]F
BATT E[xxxxpp]F
BATT E[xxxppp]F
BATT E[xxpppp]F
BATT E[xxpppp]F (blinking)
BATT E[xppppp]F (blinking)
BATT E[pppppp]F (blinking)
1)Replace the battery pack when this indication appears.
Battery voltage
BP-L40/L40A/L60/
L60A/L90/L90A
15.0 V or more
14.0 to 15.0 V
13.0 to 14.0 V
12.0 to 13.0 V
11.3 to 12.0 V
1)
11.25 to 11.3 V
11.0 to 11.25 V
11.0 V or less
Chapter 1 Overview
NP-1B/BP-90A
12.5 V or more
12.0 to 12.5 V
11.75 to 12.0 V
11.5 to 11.75 V
11.3 to 11.5 V
11.25 to 11.3 V
11.0 to 11.25 V
11.0 V or less
(Continued)
17

Advertisement

Table of Contents

Troubleshooting

loading

This manual is also suitable for:

Dsr-500wslDsr-500wspl

Table of Contents