Nu-Flame Vitesse H.E. Use, Installation & Servicing Instructions page 21

c. Fit No1Rear Cluster Coal/Pebble.
d. Fit No2 Left Cluster Coal/Pebble.
e. Fit No3 Right Cluster Coal/Pebble.
f. Fit No4 Front Cluster Coal/Pebble.
g. Before fitting the glass panel with the 2 screws and screw driver provided, check the condition of the glass and ensure it is clean
and free from any finger marks. Note: The glass is etched and the glass is to be positioned with the Nu-Flame logo is to go in the
bottom right hand corner.
Additional Instructions for Curved Trim Models Only. Note: Fit the glass panel as described in section g above before
proceeding to section h.
h. Fit Curved Infill Piece.
i. Fit Individual Loose Coal/Pebbles
Lettered 'A to F' from Left to Right
Into Cut Outs In Infill Piece.
Note : Different Size Lugs And
Cut Outs.
21