Introduction Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been providing a world of unique, creative, and affordable solutions to the vast range of problems that confront video, audio, presentation, and broadcasting professionals on a daily basis. In recent years, we have redesigned and upgraded most of our...
Avoid interference from neighboring electrical appliances that may adversely influence signal quality Position your Kramer VM-22H away from moisture, excessive sunlight and dust This equipment is to be used only inside a building. It may only be connected to other equipment that is installed inside a building.
Kramer Electronics has made arrangements with the European Advanced Recycling Network (EARN) and will cover any costs of treatment, recycling and recovery of waste Kramer Electronics branded equipment on arrival at the EARN facility. For details of Kramer’s recycling arrangements in your particular country go to our recycling pages at http://www.kramerelectronics.com/support/recycling/.
HDMI support for Deep Color, x.v.Color™, Lip Sync, CEC HDCP compliance Selected input and active output LED indicators ® The VM-22H is 5V DC fed and is housed in a DigiTOOLS enclosure. Defining the VM-22H 2x1:2 HDMI Switcher/DA This section defines the VM-22H. VM-22H - Overview...
Figure 1: VM-22H 2x1:2 HDMI Switcher/DA Feature Function 5V DC +5V DC connector for powering the unit HDMI OUT2 Connector Connects to the HDMI acceptor 2 HDMI OUT1 Connector Connects to the HDMI acceptor 1 HDMI IN 2 Connector Connects to the HDMI source 2...
Connecting the VM-22H Always switch off the power to each device before connecting it to your VM-22H. After connecting your VM-22H, connect its power and then switch on the power to each device. To connect the VM-22H as illustrated in the example in Figure 1.
Once acquired, the EDID is saved in non-volatile memory and further acquisition is not necessary. Initially, the VM-22H operates with the factory default EDID. This lets you connect the power before connecting one of the acceptors or sources. You can acquire the EDID from: ...
Page 11
4. Release the button when reaching the desired set up. The EDID is now acquired. If you set the machine to acquire the EDID from an output that is not connected, the default EDID is acquired. VM-22H - Acquiring the EDID...
12cm x 7.15cm x 2.44cm (4.7" x 2.8" 0.96") W, D, H WEIGHT: 0.3kg (0.67lbs) approx. INCLUDED ACCESSORIES: Power supply, bracket installation kit, infrared remote control transmitter OPTIONS: HDMI/HDMI male-to-male cables Specifications are subject to change without notice at http://www.kramerelectronics.com VM-22H - Technical Specifications...
Page 14
For the latest information on our products and a list of Kramer distributors, visit our Web site where updates to this user manual may be found. We welcome your questions, comments, and feedback. Web site: www.kramerelectronics.com E-mail: info@kramerel.com SAFETY WARNING...
Need help?
Do you have a question about the VM-22H and is the answer not in the manual?
Questions and answers