Maintenance - PA 1PPEC8000 User Manual

TIMER ON FUNCTION
1. With the unit ON, set operating mode, temperature and fan speed
before setting TIMER ON function.
2. Press ON/OFF
3. Press the TIMER
TIMER ON to indicate that it is active.
4. Set the time you want the unit to switch off using the
buttons (from 30 minutes to 24 hours).
• During the first 10 hours you can select 30 minute intervals up to 9.5 hours; After 10 hours, only 1
hour intervals can be selected.
5. Press the TIMER
be activated.
• At the end of the set time, the unit switches ON automatically.
• To cancel the TIMER setting, press the TIMER

MAINTENANCE

CLEANING
Before cleaning or performing maintenance, turn the unit OFF by pressing the ON/OFF
the control panel or ON/OFF
from the main wall outlet.
CLEANING THE CABINET
You should clean the unit with a slightly damp cloth, then dry with a dry cloth.
• NEVER wash the air conditioner with water. It could be dangerous and damage the unit.
• NEVER use petrol, alcohol, or solvents to clean the unit.
• NEVER spray insecticide liquid or similar substances on the unit.
CLEANING THE AIR FILTERS
To keep your air conditioner working efficiently, you should
clean the filters every week.
The filters are housed behind the upper and lower intake
grilles. (See figure on right.)
Use a vacuum cleaner to remove dust accumulation from the
filters. If they are very dirty, immerse them in warm water and
rinse them a number of times. After washing, let the filters dry
completely, then place them securely back into the unit.
button to switch into STANDBY.
button twice. The
button again to confirm the setting. The TIMER icon on the control panel will
button on the remote control. Wait for a few minutes, then unplug
is displayed above the
and
button again at any point during the set time.
ON OFF
button on
15