Operation; Optional Accessories; Maintenance - Makita DUT130 Instruction Manual

2. Tighten the shaft holder with a wrench while hold-
ing the spindle with another wrench.
1
2
► 1 . Shaft holder 2. Wrench
To remove the shaft holder, perform the installation
procedure in reverse.

OPERATION

Do not mix flammable materials or oper-
CAUTION:
ate the tool around flammable materials such as paint with
thinner used as solvent. Failure to do so may cause an injury.
CAUTION:
Do not mix high viscosity material,
such as mortar or adhesive, in the high speed mode.
You may lose the control of the tool and cause an injury.
NOTICE:
When you mix the material while the
mixing blade floating out of the material, be care-
ful not to splash the material.
1. Select high speed or low speed according to the
material to be mixed.
2. Hold the rear handle of the tool with one hand
and the grip with the other hand firmly, place the mixing
blade under material fully and turn on the tool after
making sure work site safety.
3. Move the mixing blade up and down during the mix-
ing operation so that whole part of material can be mixed.
When finishing mixing, turn off the tool, make sure
4.
that the mixing blade has come to a complete stop, and
then pull it out of the mixing container.

MAINTENANCE

CAUTION:
Always be sure that the tool is
switched off and the battery cartridge is removed before
attempting to perform inspection or maintenance.
NOTICE:
Never use gasoline, benzine, thinner,
alcohol or the like. Discoloration, deformation or
cracks may result.
To maintain product SAFETY and RELIABILITY,
repairs, any other maintenance or adjustment should
be performed by Makita Authorized or Factory Service
Centers, always using Makita replacement parts.
OPTIONAL
ACCESSORIES
2
CAUTION:
are recommended for use with your Makita tool
specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to persons. Only use accessory or attachment
for its stated purpose.
If you need any assistance for more details regard-
ing these accessories, ask your local Makita Service
Center.
• Mixing blade
• Shaft
• Shaft holder
• Hook
• Makita genuine battery and charger
NOTE: Some items in the list may be included in the
tool package as standard accessories. They may
differ from country to country.
10 ENGLISH
These accessories or attachments