Ir Learning - Russound MBX-AMP Installation Manual

3. Press the 'volume up' button on your 3rd party remote
pointed at IR input. The LED should fast blink green twice
(1 second) then continue blinking slowly.Press the 'volume
down' button on your 3rd party remote pointed at IR input.
The LED should fast blink green twice (for 1 second) then
continue blinking slowly. Press the 'mute' button on your 3rd
party remote pointed at the IR input. The LED should blink
green twice (for 1 second) then continue blinking slowly.
IR
Sensor
The LED should fast blink green twice (1 second)
IR
Sensor
The LED should fast blink green twice (1 second)
IR
Sensor
The LED should fast blink green twice (1 second)
then continue blinking slowly.
then continue blinking slowly.
then continue blinking slowly.
Russound MBX-AMP Installation Guide
4. The LED blinks green 6 more times when IR learning is
complete and successful.
5. Test the buttons you just learned to make sure they were
learned properly.
Russound IR Commands
It is possible to add additional remote control functionality
to the MBX-AMP by using standard Russound IR commands
such as those of the Russound USRC remote control. These
IR commands can be used for the same buttons that are
available on the front panel of the MBX-AMP: Play, Pause
Favorite 1 (F1) and Favorite 2 (F2), Volume Up, Volume Down,
and Mute.

IR LEARNING

LED Blinks Green x6
19