Table of Contents
Advertisement
INSTALLATION OVERVIEW
Important Considerations
1. Disconnect the power cord before making any wiring
connections to the MBX-AMP.
2. Verify that all connections and polarity are correct.
3. Keep all power cords away from all signal cables to prevent
humming caused by induced noise.
4. Label wires appropriately, on both ends of the wire run.
5. Avoid running signal cables close to house electrical wiring
for any distance. If you have to run them parallel, make sure to
space the wires at least two feet from the AC line. If you need
to cross an AC line it should be at a 90° angle.
Mounting Options
The MBX-AMP can be mounted on a table-top or shelf, but
can also be wall-mounted using the included brackets or
mounted in a rack by using a 2U or larger rack shelf. A 2U
or larger rack shelf is required to assure that there is proper
ventilation and airflow above the unit.
When mounting the unit, mount it so that the brackets are at
the top and the MBX-AMP hangs from the brackets.
6
6"
Russound MBX-AMP Installation Guide
Wall
The MBX-AMP can also be mounted into a structured wiring
can. When installed, the mounting brackets have a 6" on-
center separation between the mounting holes.
Hide quick links:
Advertisement
Table of Contents
