Ir Connections - Russound MCA-66 Installation Manual

IR CONNECTIONS

IR Connections
Routed IR Outputs
These six routed IR emitter outputs are supported by the MCA-66 IR engine
and support IR pass-through. They are also carried by the RNET Link cable to
additional controllers.
Attach the end of the IR emitter with the 3.5mm plug to the IR emitter port.
Remove the adhesive back at the other end of the emitter and attach the
emitter over the source component's IR window. When using the IR routed
outputs, in order to control this source component with IR, the source must be
selected at the keypad receiving the command.
18
Common IR
This output is supported by the MCA-66 IR engine and supports IR pass-
through from any of the IR sources or zones. This allows control of any source
equipment without that source being selected on the keypad. The connection
for the common IR output is made using an IR emitter with a 3.5mm plug.
An IR Connecting Block can be used to expand the common IR output to more
than one source.
IR emitter
MCA-66 Controller
IR Connections to MCA-66
Russound MCA-66 Installation Manual
DVD
Source 1
CD Player
Source 2
Tuner
Source 3