Optimizing The System - Siemens SITRANS F Operating Instructions Manual

Commissioning
6.5 Commissioning via PDM
Load the parameters to the device by clicking on
parameters only] to speed up the communication and avoid errors.
For overview of the parameters see Parameter lists.
6.5.5

Optimizing the system

After storage of the settings, the parameters can be set according to use.
The following shows how to set Pulse Output A and Qmax. For other parameters, refer to
"Parameter list" in the appendix.
58
. Check the option [Load changed
SITRANS FUS380/FUE380
Operating Instructions, 05/2018, A5E00730100-AE