• Press "D" to move to the next screen, the LCD will show the number of dives
in the current session on the upper left, the minimum session temperature
on the upper right, the current time in the middle, and the max depth reached
during the current session at the bottom. To go back to showing the surface
time, press the "D" button for 5 sec.
• When MSST has elapsed, the display will show the number of dives in the
current session (upper left), while pressing "D" will show the current time
in the middle. To go back to showing the surface time, press the "D" button
for 5 sec.
SURFACE RECOVER PERIOD
SURFACE RECOVER PERIOD
SURFACE RECOVER PERIOD
Surface Time screen
minimum surface
minimum temp of
recovery time (min)
number of dives in
last dive
current time
surface time
maximum
(MM:SS)
depth of
last dive
During the session, the warning "drink H2O" will appear on the screen: it's a
reminder to hydrate by drinking water. When you freedive, it's crucial to stay
hydrated in order to reduce the risks of serious health problems that can strike
freedivers that can potentially lead to very serious consequences. The worst of
these is a syndrome commonly known as Taravana.
Press any button to clear the hydration reminder.
• Maximum surface time is one hour. After that time, the session will be closed
automatically.
• You can also decide to end the session earlier by pressing the "U" button.
The SAVE LOG screen will appear for 2 seconds.
• "Memory full" will appear when there is no space remaining in the logbook.
When this happens the Driver can no longer save data for subsequent dives,
although it is still able to provide information on dives as they happen. To
allow the Driver to resume saving data, you will need to empty the memory
by permanently deleting the data (see instructions under "Deleting logbook
archive"); before you do this, we recommend you download the saved dives
to PC or Mac.
14
Current Time screen
session
RECOVERY
last dive time
SURFACE RECOVER PERIOD
SURFACE RECOVER PERIOD
SURFACE RECOVER PERIOD
Surface Time screen
Current Time screen
current time
surface time
last dive time
(MM:SS)
DIVE mode
hydration reminder
every 2 hours
in dive session
any button
Need help?
Do you have a question about the DRIVER and is the answer not in the manual?